K20 GENERAL TORQUE SPECS

SUSPENSION
* Tire Lug Nuts 80 ft/lbs
Front:
* 12mm top nut (1) 33ft/lbs
* 10mm Strut tower Flange Bolts (3) 33 ft/lbs
* 16mm damper pinch bolts (2) 115ft/lbs
* 10mm tie rod nut (1) 32ft/lbs
* brake hose bracket (1) 16ft/lbs
* wheel sensor harness bracket (1) 7.2ft/lbs
* Axle nut 134 ft/lbs

Rear
* 10mm top nut 22ft/lbs
* 10mm strut tower top nuts (2) 43ft/lbs
* 12mm damper bottom bolt 45ft/lbs

Rear Camber Arm
* 12mm outter bolt 43ft/lbs
* 12mm inner bolt (2) 43ft/lbs
* 8mm wheel sensor harness bracket 16ft/lbs

Rear Tie Bar
* 12mm inner bolt 43ft/lbs


SWAY BARS
Front
* 10mm top end link bolt [to bar] 28ft/lbs
* 10mm bottom end link bolt [to car] 29ft/lbs
* 10mm bracket bolt (2) 29ft/lbs

Rear
* 10mm top end link bolt [to bar] 28ft/lbs
* 10mm bottom end link bolt [to car] 29ft/lbs
* 8mm bracket bolt (2) 16ft/lbs


ENGINE
*Cylinder head bolts: 39Nm (29ft/lbs), 90 degr, 90 degr. (One extra 90 on new bolts.)

* Main cap bolts: 29Nm (22ft/lbs) and 56 degr.

* Girlde bolts (M8): 22Nm (16ft/lbs).

* Rod bolts: 29Nm (22ft/lbs) and 90 degr.

* Valve adjustemet locknut: 19Nm (14ft/lbs).

* Valve cover bolts: 12Nm (8.7ft/lbs).

* Chain tensioner bolts: 12Nm (8.7ft/lbs).

* Cam holder bolts: M8 22Nm (16ft/lbs), M6 12Nm (8.7ft/lbs).

* Intake Cam Gear: 112Nm (83ft/lbs).

* Exhaust Cam Gear: 69Nm (51ft/lbs).

* Timing chain cover: M6 12Nm (8.7ft/lbs).

* Crank Pulley: 245Nm (181ft/lbs).

* Flywheel: 118Nm (87ft/lbs).

* Spark plugs:16Nm (12ft/lbs).

* Valve Cover (6) 7ft/lbs

* Valve Locknut 14ft/lbs
* Spark Plugs (4) 17ft/lbs

SUBFRAME & MOUNTS
* Upper Pass Engine mount Flange Nut 40 ft/lbs
* Rear Engine Mount 43 ft/lbs
* Front Engine Mount 47 ft/lbs
* Transmission Engine Mount 40 ft/lbs
* 14mm subframe bolts (4) 76ft/lbs

OIL CHANGE
* Oil Drain Plug: 29ft/lbs (33 ft/lbs Base models and EP3)
* Oil filter: 8.7ft/lbs
* Oil Pan: 8.7ft/lbs

TRANSMISSION
* Drain plug: 29ft*lbs
* Filler plug: 33ft*lbs
* Flywheel cover: 9ft*lbs
* Flywheel: 90ft*lbs
* Pressure Plat/Clutch: 19ft*lbs

EXHAUST
* 10mm Header Bolts/Nuts 33 ft/lbs
* 8mm Header to Downpipe spring nut 16 ft/lbs
* 10mm exhaust manifold bracket bolts 33ft/lbs
* O2 sensors 33ft/lbs
* Cat to midpipe nut 25 ft/lbs

FLYWHEEL
* Step To Surface OEM Spec's .047inĀ  AKA..(47 Thousands Of An Inch)