H22-H23 ENGINE TORQUE SPEC'S
http://astore.amazon.com/hondatorquespecs-20?_encoding=UTF8&node=4

CYLINDER HEAD

Cam Caps

8 x 1.25 mm 22 Nm (2.2 kg-m, 19 lb-ft H22) (H23A 16 lb-ft)
6 x 10 mm 12 N-m (1.2 kg-m, 9 lb-ft)  "Except" (EX) 6,8 & (IN) 5,7 Are 7 lb-ft

Cam Gears Bolts
10 x 1.25 mm 37 lb-ft (H23A 27 lb-ft)

Engine Mount Bracket To Cylinder Head
(2-Bolts) 8 x 1.25 mm 16 lb-ft


Head Bolts
10 x 1.25 mm (Step 1# 29 lb-ft) (Step 2# 51 lb-ft) (Final Step 72 lb-ft) (Apply Clean Engine Oil To Threads And Under Nuts/Washers)


Vtec Solenoid
6 x 1.0 mm 9 lb-ft


Distributor
8 x 1.25 mm 13 lb-ft


Spark Plug Cover
6 x 1.0 mm 7 lb-ft


Cylinder Head Cover Nuts
6 X 1.0 mm 7 lb-ft


Exhaust Manifold/Header Self Locking Nuts
8 x 1.25 mm 23 lb-ft


Intake Manifold Self Locking Nuts
8 x 1.25 mm 16 lb-ft



COOLING SYSTEM

Water Pump 6 x 10 mm 9 lb-ft

Connecting Pipe 8 x 1.25 mm 16 lb-ft

Bleed Bolt 10 x 1.25 7 lb-ft

Thermostat Housing To Head Bolt 6 x 1.0 mm 9 lb-ft

Radiator Hose Nipple To Head 6 x 1.0 mm 9 lb-ft

ENGINE BLOCK

Main  Cap Bolts 11 x 1.5 mm 54 lb-ft (Apply Engine Oil To Bolt Threads & Washers)

Plasti Gauge Clearance 0.0004 in -0.0020 (Service Limit 0.0020)

Crank Pulley Bolt 14 x 1.25 mm (Apply Oil To Bolt Threads) 159 lb-ft

Power Steering Pump Side Nuts 8 x 1.25 mm 16 lb-ft

Alternator (Top Nut) 10 x 1.25 mm 33 lb-ft (Bottom Bolt) 8 x 1.25 mm 16 lb-ft

Rod Nuts 34 lb-ft "Plasti Gauge" 0.0011 in-0.0022 in (Service Limit 0.0024 in)

Bearing Cap Oil Bolt 6 x 1.0 mm 9 lb-ft

Oil Pan Drain Bolt 33 lb-ft

Oil Screen Pick Up 6 x 1.0 9 lb-ft

Flywheel (MT) 12 X 1.0 mm 76 lb-ft (Auto Drive Plate 64 lb-ft)

Timing Belt Adjuster Arm Nut 33 lb-ft

Oil Jet 29 lb-ft

TRANSMISSION (AT & MT)

Reverse Idler Gear Shaft Bolt 33 lb-ft

Case Bolts 10 x 1.25 mm 10 lb-ft...20 lb-ft & Then 33 lb-ft

Case Bolts 8 x 1.25 mm 20 lb-ft

Steel String & Ball Setting Screws "There's 2 On The Out Side Of Case" 16 lb-ft

Drain Bolt 29 lb-ft

Fill Bolt 33 lb-ft

Oil Fill Capacity
2.0 US qt After Drain Or 2.1 US qt After Over Haul